You're currently using an unsupported browser, which may impact the sites display and prevent key functionality. Update your browser now for greater security, speed, and the best experience on this site. View supported browsers.
Have a Tom Thumb Business account?
Related Links
Gorilla Glue Pen - Each
Glue Pen, White
Incredibly strong. Bonds virtually everything. Wood, stone, metal, ceramic, foam, glass & more! 2x faster (works like original Gorilla Glue, but dries 2x faster). Dries white. 30 min. Clamp it. 100% water proof for indoor & outdoor. Precision tip for small jobs or tight fits. Damp it (Lightly dampen surface. Do not add water to bottle): to activate Gorilla Glue. Glue it: expands, use sparingly. Clamp it: 30 min. for an incredibly strong bond. www.gorillatough.com. Made in Germany. Bottled in USA.
Contains: Harmful or fatal if swallowed. Keep out of reach of children and animals. Do not microwave or heat. Do not leave in hot vehicle. May cause sensitization by inhalation and skin contact. Individuals with chronic asthmatic conditions should consult physician prior to using product. Contains 4,4'-diphenylmethane diisocyanate (MDI). Prevent contact with skin and eyes. May cause gastro-intestinal blockage if swallowed. For medical emergencies only, call 1-800-420-7186. First Aid: Eye Contact: Flush thoroughly with water for at least 15 mins., and seek immediate medical attention. Skin Contact: For wet glue, wipe off with dry cloth. For dried glue, wash affected areas with a gritty textured soap and water. Follow-up with moisturizers liberally and frequently. Gorilla Glue may temporarily stain skin. Inhalation: If inhalation causes physical discomfort, move to fresh air. If breathing difficulty occurs or if product is swallowed seek medical attention.
Gorilla glue is not an instant glue. All surfaces must be clean and tight fitting. Wear gloves to avoid skin contact. Gorilla Glue will stain skin and ruin clothes. Damp it! Gorilla glue is cured with moisture. Lightly dampen one surface with water. Glue it! Spread a thin layer of Gorilla glue on other surface. Clamp it: Clamp objects together for 30-60 minutes. You can use heavy objects to achieve clamping pressure. Bond line improves with better clamping. Note: Do not over apply glue. While curing, glue expand 3-4 times. Be careful of squeeze-out. Not recommended for use on polypropylene or polyethylene plastics. Clean-Up: Wipe wet glue off project immediately with dry cloth and/or paint thinner. Cured glue can be removed from work piece with chisel, scraper or sandpaper. See First Aid section for removal from skin. Storage: After each use, wipe nozzle clean with a dry cloth. Squeeze all air from bottle. While still squeezing, tightly replace lid. Min. Coverage: 1/2 oz. per sq. ft. Open Working Time: Up to 5-10 minutes. Clamp: 30-60 minutes above 40 degrees F. Best at room temperature. Cure Time: 80% in 1 hour. Allow bond to cure for 24 hours. Full cure dependent on temperature and humidity. Moisture Content: Best results from 10-25%. Below 10%, dampen surfaces with water.
GORILLA GLUE
Featured Items
Disclaimer
We rely on product packaging and data from third-party sources to provide the content to you, including dietary and allergen content. We do not guarantee the accuracy, completeness, or availability of such information. Content is for general informational purposes only. You should not rely solely on the information displayed on our website. Actual product may vary. Always read labels, warnings, and directions prior to use or consumption. If you have questions or require more information about a product, please contact the manufacturer directly.
Allergen Notice: Products in our stores may contain, or may have been exposed to, one or more of the following allergens: peanuts, tree nuts, sesame, milk, eggs, wheat, soy, fish and crustacean shellfish.
Chemical Disclosure for Cookware